How To Fit Venetian Blinds on Your Window

Now a Days Blinds are used to cover window or glass door and provides better stunning look to your home. Here you Know How To Fit Made To Measure Venetian Blinds on Your Window. We need following parts or accessories to install Venetian Blinds perfectly. 

1.) We need two or more Brackets to according to the length of blind which will be adjust your blinds perfectly.

2.) You need Screws and Rawl Plugs minimum 4.

3.) Blinds with attached wound control. 

4.) Pencil and Drill Machine. 

Before Installing you need to find where you want to install window Inside the window or outside the window. Take proper measurement for your blinds either you are looking for inside the recess or outside the recess.

Image 1

Step 1 : (Image 1)  

If fitting the blind outside the window measurement (c) will be the same. To work out (c), simply minus (B) from (A) and divide the answer by two. Follow the following instruction to know How To Fit blinds. 

For Inside Recess 

Decide whether the FACE or TOP FIX, FACE FIX to fit the window bracket to window frame. TOP FIX to the lintel If the window frame is uPVC or if there are any obstruction. For example window handles.

Step 2: (Image 2) Place blinds into fitting position and place ladder controls. When you fitting the brackets you need to leave at least 5 cm from each side of controls.

Image 2

Image 3

Step 3: (Image 3)
For Top Fixing: Measure the distance that any handles protrude from the frame A. Make this measurement on the lintel and use it to position the back to the brackets and mark the position of holes B and screw brackets to lintel using screw and rawl plug supplied. 

For Face Fixing: Position brackets are swing are arm facing towards you and mark hole B. Screw brackets in place. Use Rawl Plug to fit it to wall. 

Step 4: Push swing arm anti clockwise as far as it will it move. Now clip the blind over the brackets, first easing the front lip of the head rail A to Place it. 

Image 6

Step 5: Push swing arm clock wise until the it locks into its place, firmly holding the handrail of blinds.

Step 6: (Image 6) Use Cord control A to raise or lower the blind. The wand Control B turns to adjust the slat angle.